Experience sim racing from inside the cockpit
The Pimax Dream Air SE SLAM is a wired PC VR headset for immersive sim racing, flight simulation and VR gaming. Micro-OLED displays deliver deep blacks and detailed visuals, bringing the track, cockpit and surrounding world into your field of view.

Micro-OLED clarity in a compact headset
With 2560 × 2560 pixels per eye, pancake lenses and a specified horizontal field of view of 105°, the Dream Air SE combines high resolution with a compact design. Pimax specifies a headset-only weight below 140 g.

The headset supports 72 Hz at native resolution and a 90 Hz mode with upscaling. Its DisplayPort connection delivers video directly from your PC.

SLAM tracking without base stations
Four onboard cameras track the headset’s position and movement. No external Lighthouse base stations are required. The SLAM version includes two 6DoF controllers and supports hand tracking and passthrough.

Integrated eye tracking and audio
Tobii eye tracking supports Dynamic Foveated Rendering in compatible software, concentrating rendering detail where you look. Performance benefits depend on your software and settings. Integrated spatial audio, a microphone and dual-fan cooling complete the package.

Does it require a PC?
Yes. The Dream Air SE SLAM requires a compatible gaming PC and a wired connection. It is not a standalone headset.

Preorder at Simwear
Reserve your Pimax Dream Air SE SLAM now. Availability is expected in mid-November 2026. This is an estimate and may change.

Take control of every drift and rally hairpin with the CONSPIT H APEX. This hydraulic sim racing handbrake combines precise pressure sensing, adjustable resistance and a compact aluminium construction for controlled, repeatable inputs.

Dual-chamber hydraulic technology
The vertical dual-chamber design integrates hydraulic and elastomer cylinders into a compact assembly. A one-piece die-cast aluminium cylinder, finished with precision CNC machining, delivers smooth operation and consistent resistance.

Precise pressure sensing
The high-precision 5 MPa hydraulic sensor detects subtle changes in input, helping you accurately modulate the handbrake and control rear-wheel slip.

Adjustable to your driving style
Choose between three resistance levels by repositioning the adjustment pin. A force ratio of 1.5 between positions 1 and 3 provides a broad adjustment range. The separate preload knob lets you fine-tune the initial tension and resistance of the lever.

Built for demanding sessions
Precision-machined load-bearing components and bearings in the moving mechanism provide stable operation under repeated loads. The construction is designed to eliminate mechanical free play and deliver a direct, consistent feel.

Compact mounting and USB connectivity
With a footprint suited to compact setups and a weight of just 0.77 kg, the H APEX integrates neatly into your sim rig. It mounts from underneath using Ø6 mm mounting holes and connects directly to your PC via USB.

Compact, lightweight and built for precise control: the CONSPIT 280 FR brings Formula-inspired ergonomics to your sim racing setup. With a 280 mm diameter and a weight of just 1,050 g excluding the quick release and adapter, it is designed for fast steering inputs and detailed force feedback. Ideal for Formula cars, prototypes and competitive GT racing.

Lightweight carbon fibre and aluminium construction
The 3K prepreg carbon fibre front panel and die-cast aluminium body combine rigidity with low weight. Silicone grips with CNC-machined aluminium cores provide a secure, comfortable hold, with or without racing gloves. The open-top design keeps your in-game instruments or external dashboard clearly visible.

Extensive controls at your fingertips
Access essential settings through 12 RGB buttons, two additional buttons, four encoder wheels, two 7-way funky switches and four 12-position rotary switches. The central 6-position Dial Matrix lets you switch between Encoder Remapping profiles and rotary macro configurations. All five rotary switches can also operate as encoders.

Customisable RGB telemetry
Ten RGB RPM LEDs, illuminated buttons and backlit rotary switches display relevant race information. Configure the lighting through CONSPIT Link 2.0 or use SimHub for RGB and LED control, including RPM, flag and vehicle-status effects.

Magnetic rocker shifter and dual clutch
The linked rocker shifter lets you upshift and downshift with either hand. Magnetic feedback and contactless Hall sensors deliver a crisp shifting action. The standard dual-clutch paddles support bite-point starts, dual-axis and independent-axis modes.

Flexible connectivity
On an ARES wheelbase, a compatible CDP or CDR quick release enables a connection without an external data cable. A Quick-Con Adapter and coiled data cable are included. Removing the adapter exposes a USB-C port for direct connection to a Windows PC, enabling use with compatible third-party quick releases and other wheelbases.

Throttle extension for inverted setup inclusive
Required for inverted configurations. This extension adjusts the throttle pedal reach to ensure perfect ergonomic alignment when hanging.

• 295mm Diameter design
• 5mm rigid aluminum front plate
• 4-magnetic paddle aluminum moudule (2-shifters, 2x dual-clutch)
• 24x SimHub-compatible configurable LED lights. Car specific RPM lights for iRacing. (ATSR-Hub compatible for extra customization)
• Wireless Quick Release (NRG-Style)
• 4 Thumb aluminum encoders
• 3 Backlit rotary encoders
• 2 7-Way funky switches
• Non-slip TPE rubber grips
• Compatible with uDFP20 using the QR Connect (u)DFP20 Adapter

Create a rigid and adjustable mounting point for a Direct Drive wheelbase. Designed for cockpits with an internal width of 580 or 600 mm, this front mount combines a 6 mm hardened steel plate with reinforced brackets for a stable and consistent steering position.

Compatible with most front-mounted wheelbases available on the market, including models from Simucube, VRS, PXN, Simagic (Alpha Mini).

It is not compatible with MOZA or Fanatec wheelbases. 

Compatibility and Specifications

• Compatible cockpits: SimXPro X80, XT120, XT160, XFR, FR-DD and GT-PRO
• Compatible internal width: 580 or 600 mm
• Mounting plate: 6 mm hardened steel
• Brackets: 3 mm press-bent steel
• Adjustable bracket position
• Suitable for compatible DIY aluminium-profile rigs

Pre-order – Official launch on 18 November

Pre-order your SIMAGIC P-Active baseplate now. The official launch takes place on 18 November. Pre-ordered baseplates will be shipped on that date.

The SIMAGIC P-Active Baseplate provides a sturdy foundation for your sim racing pedals. Designed for P-Active and P2000 pedals, it also supports third-party pedals, allowing you to combine components to suit your driving preferences.

Durable CNC-machined aluminium

Made from CNC-machined aluminium alloy, the baseplate offers a durable platform for mounting your pedal setup.

Flexible pedal configuration

Combine compatible pedals on a single baseplate and create a configuration tailored to your needs. When using third-party pedals, check the mounting points and dimensions before installation.

Technical specifications

• Material: CNC-machined aluminium alloy
• Compatibility: SIMAGIC P-Active, P2000 and third-party pedals
• Dimensions: 415.5 × 395.2 × 44.4 mm
• Weight: 3.1 kg

Pre-order – Official launch on 18 November

Pre-order your SIMAGIC P-Active bundle now. The official launch takes place on 18 November. Pre-ordered pedals will be shipped on that date.

Upgrade your sim racing rig with the SIMAGIC P-Active Bundle. Combining the P-Active active pedal with the P1000-F throttle and baseplate, this bundle provides a two-pedal setup that brings active braking technology to a compact platform.

Compact design, advanced technology

SIMAGIC’s proprietary stacked architecture integrates the P-Active’s components into a space-efficient layout. Its small footprint makes this bundle an appealing choice for rigs with limited pedal space.

Adjust the pedal to your driving position

The P-Active features quick pedal-angle adjustment, allowing you to adapt it to your seating position and personal preferences.

Designed for the SIMAGIC ecosystem

The bundle integrates with a wide range of SIMAGIC products, making it a versatile starting point for building or upgrading your pedal setup.

Mechanical design on display

The open-frame construction and transparent design reveal the precision components inside, giving the P-Active a distinctive industrial appearance.

Expand to three pedals

The bundle includes an active pedal, throttle and baseplate. Add a separately available SIMAGIC C-P1000 clutch pedal to build your own three-pedal configuration.

In the box

• P-Active active pedal
• P1000-F: throttle pedal and baseplate
• Cable kit
• P1000-F user manual
• P-Active user manual

Pre-order – Official launch on 18 November

Pre-order your SIMAGIC P-Active now. The official launch takes place on 18 November. Pre-ordered pedals will be shipped on that date.

Optimized pedal geometry – Push forward, control better

A raised pivot creates a more forward pedal stroke with less ankle rotation, aligning leg force for precise pressure control and smoother release under heavy braking.

Maximum force – Every force you apply is accurately detected

180 kg software limit, 250 kg sensor capacity. Mounted directly behind the pedal face, the sensor captures your foot pressure more directly for precise braking input.

Ultra-fast response – 100 ms full-stroke return

Full-stroke return in as little as 100 ms delivers fast, controlled response. Switch between brake, throttle and clutch modes in software—all with the same hardware.

Active feedback – A pedal that responds to your drive

Servo-driven control recreates spring, elastomer and hydraulic pedal feel, turning live telemetry—from ABS and wheel slip to RPM and gear changes—into feedback under your feet.

Feedback effects include:

• ABS
• Traction control (TC)
• Wheel lock
• Wheel slip
• Engine RPM
• Clutch bite point
• Gear shifts

Open pedal ecosystem – Build your pedal setup your way

Mount P-Active on an existing SIMAGIC pedal platform or the dedicated P-Active Baseplate, which supports P2000 pedal faces and third-party throttle and clutch pedals. Start with an active brake and expand at your own pace.

In the box

• P-Active
• P1000 Adapter Kit
• P2000 Profile Adapter Kit
• Screw Kit
• Cable Kit
• Quick Guide
• Stickers

Optional accessory

P-Active Baseplate

Among the most extreme road-going hypercars ever built. The work of Aston Martin's design team alongside the aerodynamic minds of Adrian Newey, limited to a handful of drivers worldwide.

SIMAGIC has recreated its steering wheel exactly. Not an interpretation. Not inspired by. A faithful, officially licensed reproduction, drawn from the Valkyrie's original specifications and finished to the standard of the car itself.

Key Features

• Official Aston Martin Licence
• Genuine 3D Carbon Fibre
• Hand-Finished Alcantara
• Lightweight Magnesium Alloy Rear Cover
• CNC Anodised Controls
• 5-inch HD Colour Touchscreen
• Official Valkyrie Dashboard UI
• SIMAGIC UP+ Modular Design
• Customizable Smart Controls
• SimPro & SimHub Support

An Official Aston Martin Licence, Not A Tribute

Created under official licence from Aston Martin, our Valkyrie wheel carries the genuine Aston Martin Wings, an authentic engraved nameplate, and a unique serial number for each wheel.

The same marks that sit at the centre of the car, now sit in your sim. Inheriting the bloodlines of the legendary hypercar, experience timeless design few will ever see in person, fewer still will ever hold. A piece to collect, and to compete with.

Built to the Original Data

Recreated from the Valkyrie's own specifications. Faithful in form, detail and feel.

The Real Car, Material for Material

Carbon Fibre

8 Layers · 15 Steps · 12 Hours

Cut · Aligned · Finished · Polished

Genuine 3D-contoured face, with the weave reproduced down to the grain.

Magnesium Alloy Structure

30% lighter than conventional aluminum alloy.

Lower rotational inertia. Faster response. More direct feedback. Better control.

Alcantara®

Hand-finished grips in the car's own material, with inward-stitched seams for a refined feel. Grippy, hard-wearing, consistent.

CNC Controls

Anodised metal paddles and stalks, machined to the real car's feel.

The Valkyrie Dashboard — Recreated to the Pixel

The Valkyrie's official dashboard UI on a 5-inch high-resolution colour touchscreen, generous for its class. What the driver sees in the car, you see on your rig.

Faithful to the Original. Refined for the Rig

UP+ Modular Design

Interchangeable paddle modules and broad wheelbase compatibility provide greater flexibility across every setup.

Custom Controls

Customizable dashboard, RPM LEDs, buttons and stalks create a setup that's uniquely yours.

Hidden Horn Button

Original concealed horn-button design, reimagined with fully customizable functionality.

5-Way Control Stalks

Classic stalk styling with enhanced 5-way functionality for seamless in-game navigation.

Exclusive Serial Number

Every wheel carries its own unique serial number, laser-etched on the underside.

SimPro Manager & SimHub Ready

The Valkyrie's instrument cluster, rebuilt pixel for pixel. The original UI is left untouched, with everything around it ready for your favorite sim titles. Configure it to perfection in SimPro Manager.

In the Box

• Aston Martin Valkyrie Steering Wheel
• Tweezers
• USB-C Cable
• Envelope bag
• Airlink

Dual-Trace Architecture, No-Compromise Dual Mode

3–10 kg Shift Force, SnapShift Response

Tunable Damping, More Refined Feedback

One-Piece Load-Bearing Chassis, More Stable Feedback

Smooth Mode Switching

Dedicated Lockout Trigger, Clearer 7+R Layout

9 RGB LEDs for Visual Feedback

Visible Mechanical Structure

50 mm Extension Link for Easier Sequential Use

Compact Footprint

1,000,000-Cycle Durability Validation

The CONSPIT CSD Lite is a 5" IPS touchscreen sim racing dashboard that brings GT race car instrumentation to your cockpit, on PC only. A 854 × 480 display running at 45 fps and 350 lumens delivers live telemetry through SimHub, while 31 RGB LEDs split across four segmented zones handle RPM lights, flags and custom alerts. Two encoder knobs and a multi-touch screen keep every page one gesture away, and the 6061-T6 aluminium shell mounts on a rig, an aluminium profile or directly on a wheelbase with the right adapter.

Key Features

• 5" IPS touchscreen — 854 × 480 resolution, 45 fps, 350 lumens, adjustable brightness
• 31 RGB LEDs across four segmented zones — RPM lights, flags, vehicle status and custom alerts
• 20+ preloaded LED modes — vehicle status and track conditions ready out of the box, no complex setup
• Full SimHub integration — ready-to-use preset file for dashboard displays, telemetry indicators and control functions
• Exclusive CONSPIT dash pages — downloadable layouts optimised for competitive racing, matched to CONSPIT hardware design
• Two encoder knobs and multi-touch screen — page navigation on the main knob, auxiliary cycling and two-finger zoom on the screen
• Fully customisable controls — every input can be reassigned to suit your setup
• 6061-T6 aluminium shell — sandblasted and anodised finish for durability
• Dual rear data ports — pick the side that suits your cable routing

Display and LED Feedback

The 5" IPS panel puts gear, RPM, speed, lap timing, delta and session data in a single glance, with a 45 fps refresh that keeps readouts smooth under load. Above the screen, the LED array is split into four segmented indicator zones so RPM lights, flag alerts, radar and vehicle status never compete for the same strip. The preloaded profile ships with more than 20 configured modes, so the dashboard is useful the moment it is plugged in.

SimHub and CONSPIT Dash Pages

CONSPIT works directly with SimHub, and the CSD Lite is fully compatible with its dashboard functionality. A ready-to-use preset SimHub file covers dashboard displays, telemetry indicators and integrated control functions. Beyond the full SimHub library, CONSPIT also publishes exclusive dash pages for download, with data layouts tuned for competitive racing and visual elements matched to the brand's hardware.

Mounting Options

The CSD Lite mounts on the CONSPIT GT-Lite, on aluminium profile rigs, or on third-party sim racing rigs using dedicated adapters. It can also be installed directly on a wheelbase with the matching adapter bracket. The rear panel carries one 1/4 inch and two M4 threaded holes, and the two data ports let you pick whichever side keeps cable routing clean.

Contains:

• Simagic Evo Pro (18 Nm) wheelbase
• Simagic Zeus Formula steering wheel + MagicDash
• Simagic P1000 dual hydraulic pedals

Contains:

• Simagic Evo (12 Nm) wheelbase
• Simagic Zeus GT steering wheel
• Simagic P1000 dual pedals