Asetek accessoires

Unleash the possibilities with the Invicta™ Quick Release Adapter!

We realize that many sim racers have personal preferences for their steering wheel so instead of locking you into a specific eco-system, we offer our Quick Release Adapter, meaning you can use your favorite steering wheel with your Asetek SimSports® Wheelbase.

Changing steering wheels has never been easier. Once you have finished installing the Quick Release Adapter, simply press a paddle to detach the wheel from the wheelbase, and it will effortlessly be in your hands. As easy as shifting gears!

The Invicta™ Quick Release  adapter is a sturdy, zero play, all aluminum quick release with an optional USB connection, meaning you can connect your wheel directly to your Asetek SimSports® Wheelbase through the QR.

Featuring both at 6x70mm and 2″ bolt pattern, maximizing compatilibity.

• Exquisite, radical, and minimalistic industrial design
• Designed and manufactured in Denmark
• All black anodized aluminium
• Three lengths included: 80 mm, 150 mm, and 200 mm (total Quick Release lengths)

Dimensions: 75 x 78 x 80/150/200mm

Outer mounting holes: 6 x 70mm bolt pattern. 6 x M5x12 screws included.

Inner mounting holes: 3/6 x 50,8 mm M5 threaded. Used when mounting from inside the wheel. 6 x M5x12 countersunk screws included (pre-installed).  

COMPATIBILITY

• Asetek Simsports® Invicta Direct ™ Drive Wheelbase
• Asetek Simsports® Forte® Direct Drive Wheelbase
• Asetek SimSports® La Prima™ Direct Drive Wheelbase
• All Steering Wheels featuring a 6x70mm or 2″ bolt pattern

Looking for Asetek software or manuals? Check our help center!

Asetek Front Mount

The Asetek Front Mount is not only designed to look cool, but it also lets you to mount your Asetek SimSports® Direct Drive wheelbase by attaching the front of the wheelbase directly to the rig, offering you a quick, sturdy and straightforward mounting option. This also makes it ossible to mount on inside or outside of the rig with easy adjusting opportunities.

The two holes on each side of the front mount gives you an option to attach your on/off and torque off buttons for a sleek look on your sim rig. The Front Mount is specially designed for the Asetek SimSports® wheelbases and bolts directly into the aluminium housing of the wheelbase. The 8 mm thick laser cut steel mount is a no-compromises mounting solution. 

The mounting option on your rig also allows a high degree of tilt so you can adjust the angle of the wheelbase to your preferred driving position. Adjusting the tilt angle is straightforward with four screws; two on each side of your rig.

Dimensions: H168 x W135 x D535 – 660 mm 

Material: 8 mm laser cut steel 

 Looking for Asetek software or manuals? Check our help center!       

Asetek Wheelbase Mount with tilt

The Asetek SimSports® Wheelbase Mount is a fully adjustable mounting option for your Asetek SimSports® wheelbase. This mounting option gives you a range of possible mounting options. The t-slots in the bottom of your wheelbase allows you to slide the wheelbase back and forth and easily angle your wheelbase up to 12.7  degrees with 4 screws; 2 on each side of the tilt bracket to find your desired racing position.  

Dimensions: See Mounting Schematics

Maximum tilt angle: 12.7 degrees

Material: 4 mm laser cut steel

Hole Pattern: Individual mounting on each side.               

 Looking for Asetek software or manuals? Check our help center!

Asetek Bottom Mount

The Bottom Mount can be mounted directly onto your table or on your rig. You mount your Asetek SimSports® Direct Drive wheelbase by attaching the bottom mount to the underside of the wheelbase and then mount it to your rig in your preferred position. The Bottom Mount must be mounted to a flat surface that supports the entire length of the mount.

The t-slots in the bottom of the wheelbase allows you to slide your wheelbase back and forth on the bracket. This mounting solution maximizes leg space in your setup and clears the way for comfortable and fully immersive sim racing.

Dimensions: 460 x 120 x 5 mm

Material: 5 mm laser cut steel

Hole Pattern: 

Wheelbase mount: 4-hole pattern (87 mm x 89 mm)

Rig mount: 3-hole pattern, 4-hole pattern

 Looking for Asetek software or manuals? Check our help center!

Asetek Front Mount for Podium Brackets

Mount your Asetek SimSports® Wheelbase to your preferred Sim Rig.

With this mount you will be able to mount your Asetek SimSports wheelbase to the Fanatec Podium side mounting brackets and other traditional side mounting brackets with a 70mm hole pattern.

This slim but sturdy solution ensures safe mounting with absolutely no flex.

A zero-flex mounting solution is an absolute must when dealing with high performance and technology-driven Direct Drive Wheelbases. This solution ensures that all of the torque and power of your wheelbase will go towards the essential feedback that gives you the immersive and reactive detail of the road and car you’re racing.

 Looking for Asetek software or manuals? Check our help center!

Asetek Table Clamps

 Looking for Asetek software or manuals? Check our help center!

Asetek magnetic input paddles

Upgrade your Forte® Formula Steering Wheel with these digital Input Paddles.

Inspired by real-life race cars our digital dual input paddles are designed to give you that all important competitive edge. Customize your wheel, to add the input and settings you prefer! Fully bindable, the digital Input Paddles gives you the possibility to have quick access to overtake settings, DRS or whatever input you desire. Without having to remove your hands from the wheel.

Made in a carbon, glass, and plastic composite material, you get a very high natural rigidity and strength providing top-of-the-line quality and durability. Both made to last and for comfort, they’re also lightweight, ergonomical and low noise.

With no wires to connect and a quick and simple one-screw installation, the paddles also feature adjustable width, to fit all hand sizes and preferences.

 Looking for Asetek software or manuals? Check our help center!

Asetek clutch paddles

Upgrade your Forte® Formula Steering Wheel with these analog dual Clutch Paddles.

Inspired by real-life race cars our analog dual paddles are designed to give you that all important competitive edge. Experience dual clutch action for ultimate standing start and clutch-and-coast performance, helping you to cut those precious milliseconds!

Made in a carbon, glass, and plastic composite material, you get a very high natural rigidity and strength providing top-of-the-line quality and durability. Both made to last and for comfort, they’re also lightweight, ergonomical and low noise.

With a quick and simple one-screw installation, the paddles also feature adjustable width, to fit all hand sizes and preferences.

Featuring 3 modes of configuration in RaceHub™:

Dual Clutch – Use both clutches to quickly launch your car from a standing start. Activate both clutches to enter dual clutch mode. Release one of the clutch paddles to reach the bite point. Slowly release the second clutch for a smooth launch. Featuring the ability to configure your desired bite point.

Individual paddles – Giving you two individual axis to configure to your liking in your preferred Sim.

Buttons –  Configure each paddle to act as extra input buttons. Configurable in your preferred Sim to the exact function you desire.

 Looking for Asetek software or manuals? Check our help center!

Asetek Forte pedal face plate

The all-aluminum Forte Pedal Face Plates are a sock-friendly, quick-to-mount accessory to your Invicta™ Sim Racing Pedals. The face plates can be adjusted to your preferred setting for the best sim racing experience.

The set includes two pedal face plates for brake and throttle.

 Looking for Asetek software or manuals? Check our help center!

Asetek firm throttle spring for Invicta pedals

The firm throttle spring is an easy-to-install accessory for your Asetek SimSports® Invicta™ pedals. The throttle spring is harder than the one originally included and allows you to have a firmer sensation and even better throttle control. It gives you a better feel when racing, higher resistance and makes it possible to apply more pressure to the throttle, which gives you an even more realistic racing experience.

The spring is already included in the Forte® pedals throttle by default, but the firm throttle spring can be used as a replacement or spare part. 

One spring and the compatible pivot base is included in the box.

 Looking for Asetek software or manuals? Check our help center!

Asetek Invicta long travel kit

With the Long Travel Kit for your Invicta Pedal Set you will gain an extra 40% travel on your T.H.O.R.P.™ brake cylinder – perfect if you are into Rally or Road Cars.

The highly notable increase in the travel of your brake means you now have 35 mm of travel, opposed to the original 25 mm.

The Invicta Long Travel Kit will give you the real sensation of being in a rally or road car, while also maintaining the T.H.O.R.P. signature feeling. This is a no-compromises solution that allows you to maintain the unique sensation of a hard- and soft stage, which is only offered by the Asetek SimSports Pedal Sets.

The Invicta Long Travel Kit will work with all Asetek SimSports certified elastomers.

 Looking for Asetek software or manuals? Check our help center!

Asetek elastomer kit

Personalize your braking experience to your preference with the Elastomer kit.

The most requested accessory to date, The Elastomer kit includes five elastomers of different strengths, providing new options for a softer or harder brake feeling on your Asetek SimSports® pedals.

Allowing you to maximize your performance or achieve the perfect simulation of your favorite ride!

Compatible with all Asetek SimSports® Brake & Throttle pedal sets.

 Looking for Asetek software or manuals? Check our help center!